levleviev + usb   3

[Guide] 10.11+ USB changes and solutions | tonymacx86.com
Specific Recommendations (7-series, 8-series, 9-series, X99)

Do the EHCx->EH0x rename. It is a no-brainer first step.

For 7-series, 8-series, and 9-series, install FakePCIID_XHCIMux.kext (FakePCIID_XHCIMux has no effect without FakePCIID.kext, and is valid only for the Intel chipsets mentioned).

For many boards, assuming _UPC is correct on XHC, that will have everything working.

But two items at this point may cause problems:
Your DSDT may be disabling USB3 due to improper Windows emulation. Apply the XOSI fix to address this.
Built-in hub port injectors for your SMBIOS may be interfering. Install USBInjectAll.kext and use kernel flag -uia_exclude_xhc. This will enable the USBInjectAll port injectors for EH0x and the associated hubs, overriding the built-in hub port injectors, but keep DSDT control of XHC.

If there are some ports still not working, remove -uia_exclude_xhc kernel flag. If your XHC has more than 15 ports (device-id is 8086:8xxx), you will need the port limit patch, or will need to divide your testing into stages (using -uia_exclude_hs, -uia_exclude_ss, -uia_exclude_ssp).

Note: For X99 systems, the native Intel XHC drivers do not support 8086:8d31. You need an injector kext to enable it. See USBInjectAll.kext README for details.
hackintosh  usb3.0  usb  guide  sierra  yosemite 
october 2017 by levleviev

Copy this bookmark: