kilroy2 + fresco   41

Fresco master lighting control – Acuity Support
Acuity Support Fresco General
Fresco master lighting control
A Fresco system typically is configured for room based control, however it can be programmed such that a single Fresco unit can be used as a master lighting control, global control station, centralized controller, etc.

The idea is to have a single Fresco Touchscreen unit setup to control the lights in all other areas where Fresco units are configured, this would allow individual room control of all rooms from a single Fresco unit. This would also allow turning on and off of the lights from a single centralized location for instance.

The operation can be accomplished by assigning a Fresco unit (the master unit) to have channels assigned to the zones or groups of each individual (standalone) room. The zones are unique across the Fresco network and therefore changes in one room, would update the zone levels in another room with the same zone id. The master controller in this case would have a channel assigned to control each zone or group of all the standalone rooms.

Note: based on size of space, number of zones or groups, it may not be possible to setup a single channel for every room and every zone.

Use the following as an example:

Room A

- Channel 1 = Zone 10

Room B

- Channel 1 = Zone 20

Room C

- Channel 1 = Zone 30

Master Controller, Room D

- Channel 1 = Zone 10

- Channel 2 = Zone 20

- Channel 3 = Zone 30

Was this article helpful? 0 out of 0 found this helpful
Have more questions? Submit a request
Fresco  master  lighting  control  nlight  dmx  4th 
august 2019 by kilroy2

related tags

-  /  0-10  0-10V  0-10VDC  4th  24V  a  acuity  aculux  add  AIR:  and  architainment  ARTC  AVI  axion  BACnet/IP  Blink  Brands  Brands'  bridge  bulbs  Codes  control  Controller  controls  create  dali  delete  depot  Device  devices  Digital  dim  dimming  distech  dmx  DMX/RDM  DMX512  DMX512A  DMX?  do  downlight  Driver  DTP  dxr-modulars  DXT  easyl  Easyl™  ecosystem  Error  EVO  Explained  fcn  fixture  fixtures.  for  fresco  Fresco™  gateway  grafix  Home  How  I  Indicators  Install  Intelligent  is  led  library  library?  light  lighting  List  lithonia  LMP  LMP1  LPDD  luminaires  Management  Manufacturers  master  modules  network  new  nlight  nLight®  ntune  numbers  of  Overview  Panel  panels  part  programming  RB  rdm  relay  replacement  RGB  RGB+TW  rgbw  scene  Screen  sensor  Show  Show™  sources  Status  strip  Striplight  Support  Switch  switching  System  Tester  the  to  Tool  touchscreen  traditional  troffer  TRULUX  tunable  tune  tuneable  tutorial  update  V  volt  What  white  white.  wifi  XWM  |   

Copy this bookmark: