jm + sensors   1

NTSB: Autopilot steered Tesla car toward traffic barrier before deadly crash
This is the Tesla self-crashing car in action. Remember how it works. It visually recognizes rear ends of cars using a BW camera and Mobileye (at least in early models) vision software. It also recognizes lane lines and tries to center between them. It has a low resolution radar system which ranges moving metallic objects like cars but ignores stationary obstacles. And there are some side-mounted sonars for detecting vehicles a few meters away on the side, which are not relevant here.

The system performed as designed. The white lines of the gore (the painted wedge) leading to this very shallow off ramp become far enough apart that they look like a lane.[1] If the vehicle ever got into the gore area, it would track as if in a lane, right into the crash barrier. It won't stop for the crash barrier, because it doesn't detect stationary obstacles. Here, it sped up, because there was no longer a car ahead. Then it lane-followed right into the crash barrier.

That's the fundamental problem here. These vehicles will run into stationary obstacles at full speed with no warning or emergency braking at all. That is by design. This is not an implementation bug or sensor failure. It follows directly from the decision to ship "Autopilot" with that sensor suite and set of capabilities.
tesla  fail  safety  self-driving  autopilot  cars  driving  sonar  radar  sensors  ai 
june 2018 by jm

Copy this bookmark:



description:


tags: